Roof Vent VMAX-102 for ventilation area 100 to 150 ft2
Roof Vent VMAX-102 for ventilation area 100 to 150 ft2
Roof Vent VMAX-102 for ventilation area 100 to 150 ft2
Roof Vent VMAX-102 for ventilation area 100 to 150 ft2

Available Colours

Regent Grey
QC-8730
VW-6082

Black
QC-8262
VW-6068

Metro Brown
QC-8228
VW-6154

White
Maximum

For Additional Colours

Roof Vent
VMAX-102

Ventilation area 100 to 150 ft2

Unlike the gooseneck, the Maximum Ventilators are CSA approved . Its unique storm proof system prevents infiltrations while at the same time capturing the wind flow from all directions and at wind velocities as low as 6 km./hr. (4 mi./hr.). With this combination of technology, wind and pressure differentials, a “chimney or, vacuum effect” results in drawing the stale air and moisture out, thus preventing moisture & heat build-up within the attic space.
This model has been designed to be installed onto a wooden curb. The thickness of the wooden curb in conjunction with the thickness of the roofing membrane will determine the size of the ventilator required. The interior dimension of the wood curb should equal to the opening in the deck to allow for unobstructed air flow. The suggested roof area for one (1) ventilator model VMAX-102-12 has been calculated based on a 10 in. x 10 in. opening or (hole) of curb and roof deck.

Specifications

  • Deflectors: 1
  • Suggested Ventilation Area: 100 to 150 ft2
  • Net Free Evacuation: 96 in2
  • Tested Extraction Rate: 134 CFM
  • Base Flashing: 45 degree cant flashing
  • Storm Proof: Unique precision engineered deflector system
  • Solid: Built of galvanized steel
  • Standard Gauge: 24 & 26
  • Rodent Proof: Built-in galvanized wire mesh screen
  • Finish: Interior and exterior powder coated polyester baked paint with UV protection
  • Compliances: CSA, CAN-3-A930M82, ASTM-527
  • Warranty: Limited Lifetime Warranty on all manufacturing defects, 5 years on paint & corrosion
  • Available Colours: Black, Brown, Grey and White

A limited selection of special colours is available at a slight premium.

Accessories

RETENTION PAN PLASTIC

Used in conjunction with the media filter. The polypropylene retention pan must be placed over the insulation to act as a second line of defense against infiltration.

EXTENSIONS

If your roof ventilator is not high enough. We have an extension from 12″ to 72″. Available Colours: Black, Brown, and Grey.

  • Special orders only. Manufacturing delays may vary depending on season.
  • Available Colours: Black, brown and grey.
  • Please note that we can manufacture in other sizes, metals or gauges.
  • Support Brackets are available for extensions three (3) feet and higher at a small premium.

A limited selection of special colours is available at a slight premium.

MEDIA FILTER

If snow infiltration is a problem. The Media Filter can be used in residential, commercial and industrial applications. A loss of ventilator efficiency of approximately 20% should be considered.

Documentation